Loading...
NEW
971
3
Course code: 000390
School of Engineering
MECH019 - Valves and actuators in oil and gas industry
3.0
2 ratings
3 students
Author:
Boris Koryagin
Upcoming sessions
Date Location Language Format Price
Any time Online , Self-paced $79,99
Self-paced
Register for the course
24.02.2025 - 25.02.2025 Online , Russian Russian Webinar $550,00
Webinar
Register for the course
28.08.2025 - 29.08.2025 Баку , Russian Russian Classroom $1 500,00
Classroom
Register for the course
04.09.2025 - 05.09.2025 Алматы , Russian Russian Classroom $1 500,00
Classroom
Register for the course
04.09.2025 - 05.09.2025 Online , Russian Russian Webinar $550,00
Webinar
Register for the course
16.10.2025 - 18.10.2025 Баку , Russian Russian Classroom $1 500,00
Classroom
Register for the course
11.12.2025 - 12.12.2025 Ереван , Russian Russian Classroom $1 500,00
Classroom
Register for the course
Special Offer
Competencies
What this course about?

In the oil, gas and petrochemical industry, precision control of the flow of product through valves in the system is vital, and modulation of that flow depends on the valve actuator. These critical pieces of equipment must perform reliably and safely under the most extreme conditions: very high and low temperatures, drought or high-rainfall environments, remote situations in deserts or the arctic, and the corrosive effects of chemicals, high humidity or salinity for extended periods. In potentially explosive atmospheres, explosion protection is required; and in some applications, fireproof operation is critical.

In addition to the core function of opening and closing the valve, the actuator forms a crucial interface between the process and the supervisory control system, providing seamless integration into whichever distributed control system (DCS) is used in the plant network. Moreover, where the Industrial Internet of Things (IIoT) plays a role, electric actuators equipped with powerful electronics must serve as information hubs, providing direct access to a wide variety of both process and diagnostics data.

Plant and pipeline operations depend on a high degree of valve automation for fundamental functions. The complex processes involved with the flow of material, pumping stations, compressor stations, etc., require the valve positioning to be accurate and extremely reliable.

Actuators must operate the full range of valves—from ball valves, butterfly valves, gate valves to others—to control the flow of both gas and liquids. Typically, ball or butterfly valve actuation requires part-turn actuators that provide a swivel movement of generally 90 degrees for full travel. Gate valves, on the other hand, typically need multi-turn actuators that provide a high number of turns to operate the valve from open to close and vice versa

Another differentiation is the type of duty the actuator has to perform, whether that’s open/close or modulating. Actuators used to isolate a segment, allow maintenance or interruptions in the process, or in worst case stop a leak, are required to operate infrequently to open or close shut-off valves.

Modulating actuators, on the other hand, provide enhanced positioning accuracy for control valves to precisely modulate the flow within pipes. In the upstream segment, this is for the flow of crude oil and natural gas; in the midstream segment, it’s for the storage and transportation of resources. In the downstream segment, this is for the refining process of crude oil, as well as the sale and distribution of both the refined product (i.e., gasoline, fuel, asphalt, etc.) and to feed raw materials to a variety of petrochemical industries that use petroleum-based products to make plastics, fertilizers, pharmaceuticals and more.

Who is this course for?
Process, chemical and mechanical engineers, operation, technical service and maintenance professionals, technical professionals responsible for maintenance and repair of equipment.
What will you learn?
  • Compare various types of final control elements
  • Understand a typical valve operation in a control loop
  • Differentiate between various types of valves and the benefits of each
  • Compare rising stem to rotary style valves
  • Analyze a control system to determine control valve needs
  • Use ISA standards for control valve specification and selection
  • Size valves for any flow condition likely to be found in a process plant
  • Evaluate and select actuators for specific applications
  • Specify appropriate auxiliaries including positioners and I/P transducers
  • Design control valve installations that are safe and trouble-free
Instructor
Verified
174 students 4.7 (131 reviews)
Instructor-expert
#Mechanical engineering and pipeline systems
#Static equipment
Борис Корягин является высококвалифицированным специалистом с более чем 30-летним опытом работы в механике и инженерии в нефтегазовой отрасли. Его карьерный путь включает широкий спектр должностей, от ведущего инженера-механика до консультанта и инструкто...
Read more
Course outline
  • Mechanical and control valves
  • Types of valves
  • Control valves
  • Mechanical & control valves
  • Glope valves, manual valves
  • Single port valves & double port valves
  • Angle valves, three way valves
  • Butterfly valves, ball valves, diaphragm valves
  • Cage valves, low noise valves, cavitation trim valves
  • Low flow valves, low tem
  • Valves, eccentric valves
  • Plug valves, pinch valves, axial flow valves
  • Gate valves, non return valves
  • Cavitation & flushing
  • Suitability of valves for different applications
  • High pressure drop, pressure & temperature rating
  • Shut off differential pressure, high temperature
  • Cryogenic temperature, very low flow
  • Valve rageability
  • Leakage, noise, high viscosity
  • Pneumatic actuator
  • Spring & diaphragm actuators
  • Electro hydraulic actuators
  • Electrical actuators
  • Manual actuators
  • Rolling & diaphragm actuators
  • Safe failure
  • Valve posioners
  • Valve actuator sizing
Eni
Total
Eni
Endesa
Shell
Chevron
Gas Natural
Iberdrola
Eni
Inpex
Eni
Exonmobile
Students feedback
Overall assessment of the course
3.0
0%
50%
0%
50%
0%
The learning objectives were clear throughout the entire training process
4.5
50%
50%
0%
0%
0%
I am confident that I will be able to apply the acquired knowledge / skills in their work
4.0
50%
0%
50%
0%
0%
Learning objectives have been achieved
4.0
50%
0%
50%
0%
0%
The content of the program matched my work tasks
4.0
50%
0%
50%
0%
0%
The complexity of the training program corresponded to the level training trainees
3.5
50%
0%
0%
50%
0%
After completing this training program, I have upgraded your level of knowledge in this area
3.5
50%
0%
0%
50%
0%
After completing this training program, I have upgraded the level of their skills in this area
3.5
50%
0%
0%
50%
0%
I can recommend this program to my colleagues
3.5
50%
0%
0%
50%
0%
Rustem
28.04.2023
4.0
The most important things you learned in learning process:
Узнал новые виды клапанов, характеристику дисковых затворов.
What did you like the most:
Работа с аудиторией, отзывчивость инструктора.
Aibolat
28.04.2023
2.0
The most important things you learned in learning process:
информация была базовая для моего уровня
What did you like the most:
-
Expand

Training can take place in 4 formats:

  • Self-paced
  • Blended learning
  • Instructor-led online (webinar)
  • Instructor-led offline (classroom)

Description of training formats:

  • Self-paced learning or e-Learning means you can learn in your own time and control the amount of material to consume. There is no need to complete the assignments and take the courses at the same time as other learners.
  • Blended learning or "hybrid learning" means you can combine Self-paced learning or e-Learning with traditional instructor-led classroom or webinar activities. This approach requires physical presence of both teacher and student in physical or virtual (webinars) classrooms or workshops. Webinar is a seminar or presentation that takes place on the internet, allowing participants in different locations to see and hear the presenter, ask questions, and sometimes answer polls.
  • Instructor-led training, or ILT, means that the learning can be delivered in a lecture or classroom format, as an interactive workshop, as a demonstration under the supervision and control of qualified trainer or instructor with the opportunity for learners to practice, or even virtually, using video-conferencing tools.

When forming groups of students, special attention is paid to important criteria - the same level of knowledge and interests among all students of the course, in order to maintain stable group dynamics during training.

Group dynamics is the development of a group in time, which is caused by the interaction of participants with each other and external influence on the group. In other words, these are the stages that the training group goes through in the process of communicating with the coach and among themselves.

The optimal group size for different types of training:

  • Self-paced / E-learning: 1
  • Instructor-led off-line (classroom): 6 – 12
  • Instructor-led on-line (webinar): 6 – 12
  • Blended learning: 6 – 12
  • Workshop: 6 – 12
  • On-the-job: 2 – 4
  • Simulator: 1 – 2

Feedback in the form of assessments and recommendations is given to students during the course of training with the participation of an instructor and is saved in the course card and student profile.

In order to control the quality of the services provided, students can evaluate the quality and training programme. Forms of assessment of the quality of training differ for courses with the participation of an instructor and those that are held in a self-paced format.

For courses with an instructor, start and end dates are indicated. At the same time, it is important to pay attention to the deadlines for passing tests, exams and practical tasks. If the specified deadlines are missed, the student may not be allowed to complete the entire course programme.

A personal account is a space for storing your training preferences, test and exam results, grades on completed training, as well as your individual plan for professional and personal development.

Users of the personal account have access to articles and blogs in specialized areas, as well as the ability to rate the completed training and leave comments under the articles and blogs of our instructors and technical authors

Registered users of a personal account can have various roles, including the role of a student, instructor or content developer. However, for all roles, except for the student role, you will need to go through an additional verification procedure to confirm your qualifications.

Based on the results of training, students are issued a certificate of training. All training certificates fall into three main categories:

  • Certificate of Attendance - students who successfully completed the course but did not pass the tests and exams can apply for a certificate of attendance.
  • Certificate of Completion - students who have successfully completed a course could apply for a Certificate of Completion, this type of certificate is often required for compliance training.
  • Verified Certificate - it is a verified certificate that is issued when students have passed exams under the supervision of a dedicated proctor.

You can always download a copy of your training certificate in PDF format in your personal account.

You will still have access to the course after completing it, provided that your account is active and not compromised and Tecedu is still licensed for the course. So if you want to review specific content in the course after completing it, or do it all over again, you can easily do so. In rare cases, instructors may remove their courses from the Tecedu marketplace, or we may need to remove a course from the platform for legal reasons.

During the training, you may encounter various forms of testing and knowledge testing. The most common assessment methods are:

  • preliminary (base-line assessment) - to determine the current level of knowledge and adapt the personal curriculum
  • intermediate - to check the progress of learning
  • final - to complete training and final assessment of knowledge and skills, can be in the form of a project, testing or practical exam

Travel to the place of full-time training is not included in the cost of training. Accommodation during full-time studies can be included in the full board tuition fees.

While Tecedu is not an accredited institution, we offer skills-based courses taught by real experts in their field, and every approved, paid course features a certificate of completion or attendance to document your accomplishment.

You can preview samples of the training materials and review key information about the course on our website. You can also review feedback and recommendations from students who already completed this course.

We want you to be happy, so almost all purchased courses can be returned within 30 days. If you are not satisfied with the course, you can request a refund, provided the request complies with our return policy.

The 30-day money back policy allows students to receive quality teaching services with minimal risk, we must also protect our teachers from fraud and provide them with a reasonable payment schedule. Payments are sent to instructors after 30 days, so we will not process refund requests received after the refund period.

We reserve the right, in our sole discretion, to limit or deny refund requests in cases where we believe there is refund abuse, including but not limited to the following:

  • A significant portion of the course has been consumed or downloaded by a student before the refund was requested.
  • Multiple refunds have been requested by a student for the same course.
  • Excessive refunds have been requested by a student.
  • Users whose account is blocked or access to courses is disabled due to violation of our Terms and Conditions or the Rules of Trust and Security.
  • We do not grant refunds for any subscription services.
  • These refund restrictions will be enforced to the extent permitted by applicable law.

We accept most international credit and debit cards like Visa, MasterCard, American Express, JCB and Discover. Bank Transfers also may be an option.

Smart Virtual Classroom (open digital / virtual classroom).

Conducting classes is based on the fact that the teacher demonstrates text, drawings, graphics, presentations on an interactive board, while the content appears in the student's electronic notebook. A specially designed digital notepad and pen are used to create and edit text and images that can be redirected to any surface via a projector.

Classes are live streamed online, automatically recorded and published on the Learning Portal, allowing you to save them for reuse anytime, anywhere, on any mobile device. This makes it possible not to miss classes and keep up with classes and keep up with the passage of new material.

Game Based Learning (learning using a virtual game environment)

Real-life training uses the principles of game organization, which allows future professionals to rehearse and hone their skills in a virtual emergency. Learning as a game provides an opportunity to establish a connection between the learning activity and real life.

The technology provides the following learning opportunities:

  • Focused on the needs of the user
  • Instant feedback
  • Independent decision making and choice of actions
  • Better assimilation and memorization of the material
  • Adaptive pace of learning tailored to the individual needs of the student
  • Better transfer of skills learned in a learning situation to real conditions

Basic principles of training:

  • A gradual increase in the level of difficulty in the game;
  • Using a simplified version of a problem situation;
  • Action in a variable gaming environment;
  • The right choice is made through experimentation.

The main advantages of Game Based Learning technology:

  • Low degree of physical risk and liability
  • Motivation to learn while receiving positive emotions from the process;
  • Practice - mirroring the real situation
  • Timely feedback
  • Choice of different playing roles
  • Learning in collaboration
  • Developing your own behavior strategy
Laboratory workshops using remote access technologies

Conducting practical classes online using remote access technologies for presentations, multimedia solutions and virtual reality:

  • Laboratory workshops that simulate the operation of expensive bench equipment in real production
  • Virtual experiment, which is visually indistinguishable from a remote real experiment performed
  • Virtual instruments, which are an exact copy of real instruments
  • Mathematical modeling to clarify the physical characteristics, chemical content of the investigated object or phenomenon.
MECH019 - Valves and actuators in oil and gas industry
Language: English, Russian
Level: Foundation
mail@tecedu.org
+7 747 898 5041
+7 7182 901 933