Loading...
NEW
181
0
Course code: 000370
School of Engineering
Power generation using steam or gas turbines and combined cycle power plants
0.0
0 ratings
0 students
What this course about?

This program provides a detailed understanding of steam power plants, gas turbines, and combined cycle plants. Each of the components such as compressors, gas and steam turbines, heat recovery steam generators, deaerators, condensers, lubricating systems, instrumentation, control systems, transformers, and generators are covered.

Steam turbines of several types, which have widely varying configurations and applications, are used extensively in the process industries. These steam turbines represent a significant part of the capital and operating costs of most plants, so that optimizing their selection is of major economic importance.

This course will cover the operating principles of turbines, specifications, their design, thermodynamics, effects of efficiency on operating costs, energy usage, effect on plant costs, special materials of construction, selection, troubleshooting, and maintenance.

Who is this course for?
Senior technicians, operators, supervisors, superintendents and corporate engineering, plant planning and design, systems design, equipment selection and evaluation, and equipment maintenance areas. Also, equipment and systems specialists in engineering contractor firms and managerial and supervisory individuals responsible for operations and maintenance functions.
What will you learn?
  • List all components and subsystems of the various types of gas turbines, steam power plants, and combined cycle plants;
  • Explain the advantages, applications, performance, and economics of combined cycle plants;
  • Talk about various equipment including compressors, turbines, governing systems, combustors, deaerators, feedwater heaters, transformers, generators and auxiliaries;
  • Explain the maintenance required for gas turbines, steam power plants, combined cycles and generators to minimize their operating cost and maximize their efficiency, reliability, and longevity;
  • Talk about the monitoring and control of environmental emissions;
  • Discover instrumentation and control systems of gas turbines and combined cycles;
  • Improve their knowledge of predictive and preventive maintenance, reliability and testing;
  • Gain a thorough understanding of the selection considerations and applications of steam power plants and combined-cycle plants.
Competencies
Electrical
Power transmission
Electrical, Instrumentation and Controls
Courses in this discipline
Course outline
  • Review of Thermodynamics Principles
  • Steam Power Plants
  • The Fire-Tube Boiler
  • The Water-Tube Boiler
  • The Steam Drum
  • Superheaters and Reheaters
  • Steam Turbines
  • Reheaters
  • Condensers
  • Feedwater Heaters
  • Efficiency and Heat Rate
  • Supercritical Plants
  • Economics of Steam Power Plants
  • Turbine Types
  • Compound Turbines
  • Turbine Control Systems
  • Steam Turbine Maintenance
  • Steam Generators, Heat Exchangers, and Condensers
  • Power Station Performance Monitoring
  • The Turbine Governing Systems
  • Steam Chests and Valves
  • Turbine Protective Devices
  • Turbine Instrumentation
  • Lubrication Systems
  • Gland Sealing System
  • Frequently Asked Questions about Turbine-Generator Balancing, Vibration, Analysis and Maintenance
  • Features Enhancing The Reliability and Maintainability of Steam Turbines
  • Gas Turbine Fundamentals
  • Overview of Gas Turbines
  • Gas Turbine Design
  • Gas Turbine Calculations
  • Gas Turbine Compressors
  • Compressors Auxiliaries, Off-Design Performance, Stall, and Surge
  • Centrifugal Compressors - Components, Performance Characteristics, Balancing, Surge Prevention Systems, and Testing
  • Dynamic Compressors Performance
  • Compressor Seal Systems
  • Dry Seals, Advanced Sealing Mechanisms, and Magnetic Bearings
  • Combined Cycle vs Simple Cycle Power Plants
  • Combined Cycle's Technology Overview
  • Single-Shaft Combined Cycle Power Generating Plants
  • Economic and Technical Considerations for Combined Cycle Performance & Enhancement Options
  • Combined Cycle Operation and Maintenance
  • Latest improvements in Combined Cycle Technology
  • Combined Cycle vs Simple Cycle Power Plants
  • Combined Cycle's Technology Overview
  • Single-Shaft Combined Cycle Power Generating Plants
  • Economic and Technical Considerations for Combined Cycle Performance & Enhancement Options
  • Combined Cycle Operation and Maintenance
  • Latest improvements in Combined Cycle Technology
Upcoming sessions
Date Location Language Price Format
Currently, this course is conducted only in an intracorporate format.
Eni
Total
Eni
Endesa
Shell
Chevron
Gas Natural
Iberdrola
Eni
Inpex
Eni
Exonmobile
Frequently Asked Questions (FAQ)

Training can take place in 4 formats:

  • Self-paced
  • Blended learning
  • Instructor-led online (webinar)
  • Instructor-led offline (classroom)

Description of training formats:

  • Self-paced learning or e-Learning means you can learn in your own time and control the amount of material to consume. There is no need to complete the assignments and take the courses at the same time as other learners.
  • Blended learning or "hybrid learning" means you can combine Self-paced learning or e-Learning with traditional instructor-led classroom or webinar activities. This approach requires physical presence of both teacher and student in physical or virtual (webinars) classrooms or workshops. Webinar is a seminar or presentation that takes place on the internet, allowing participants in different locations to see and hear the presenter, ask questions, and sometimes answer polls.
  • Instructor-led training, or ILT, means that the learning can be delivered in a lecture or classroom format, as an interactive workshop, as a demonstration under the supervision and control of qualified trainer or instructor with the opportunity for learners to practice, or even virtually, using video-conferencing tools.

When forming groups of students, special attention is paid to important criteria - the same level of knowledge and interests among all students of the course, in order to maintain stable group dynamics during training.

Group dynamics is the development of a group in time, which is caused by the interaction of participants with each other and external influence on the group. In other words, these are the stages that the training group goes through in the process of communicating with the coach and among themselves.

The optimal group size for different types of training:

  • Self-paced / E-learning: 1
  • Instructor-led off-line (classroom): 6 – 12
  • Instructor-led on-line (webinar): 6 – 12
  • Blended learning: 6 – 12
  • Workshop: 6 – 12
  • On-the-job: 2 – 4
  • Simulator: 1 – 2

Feedback in the form of assessments and recommendations is given to students during the course of training with the participation of an instructor and is saved in the course card and student profile.

In order to control the quality of the services provided, students can evaluate the quality and training programme. Forms of assessment of the quality of training differ for courses with the participation of an instructor and those that are held in a self-paced format.

For courses with an instructor, start and end dates are indicated. At the same time, it is important to pay attention to the deadlines for passing tests, exams and practical tasks. If the specified deadlines are missed, the student may not be allowed to complete the entire course programme.

A personal account is a space for storing your training preferences, test and exam results, grades on completed training, as well as your individual plan for professional and personal development.

Users of the personal account have access to articles and blogs in specialized areas, as well as the ability to rate the completed training and leave comments under the articles and blogs of our instructors and technical authors

Registered users of a personal account can have various roles, including the role of a student, instructor or content developer. However, for all roles, except for the student role, you will need to go through an additional verification procedure to confirm your qualifications.

Based on the results of training, students are issued a certificate of training. All training certificates fall into three main categories:

  • Certificate of Attendance - students who successfully completed the course but did not pass the tests and exams can apply for a certificate of attendance.
  • Certificate of Completion - students who have successfully completed a course could apply for a Certificate of Completion, this type of certificate is often required for compliance training.
  • Verified Certificate - it is a verified certificate that is issued when students have passed exams under the supervision of a dedicated proctor.

You can always download a copy of your training certificate in PDF format in your personal account.

You will still have access to the course after completing it, provided that your account is active and not compromised and Tecedu is still licensed for the course. So if you want to review specific content in the course after completing it, or do it all over again, you can easily do so. In rare cases, instructors may remove their courses from the Tecedu marketplace, or we may need to remove a course from the platform for legal reasons.

During the training, you may encounter various forms of testing and knowledge testing. The most common assessment methods are:

  • preliminary (base-line assessment) - to determine the current level of knowledge and adapt the personal curriculum
  • intermediate - to check the progress of learning
  • final - to complete training and final assessment of knowledge and skills, can be in the form of a project, testing or practical exam

Travel to the place of full-time training is not included in the cost of training. Accommodation during full-time studies can be included in the full board tuition fees.

While Tecedu is not an accredited institution, we offer skills-based courses taught by real experts in their field, and every approved, paid course features a certificate of completion or attendance to document your accomplishment.

You can preview samples of the training materials and review key information about the course on our website. You can also review feedback and recommendations from students who already completed this course.

We want you to be happy, so almost all purchased courses can be returned within 30 days. If you are not satisfied with the course, you can request a refund, provided the request complies with our return policy.

The 30-day money back policy allows students to receive quality teaching services with minimal risk, we must also protect our teachers from fraud and provide them with a reasonable payment schedule. Payments are sent to instructors after 30 days, so we will not process refund requests received after the refund period.

We reserve the right, in our sole discretion, to limit or deny refund requests in cases where we believe there is refund abuse, including but not limited to the following:

  • A significant portion of the course has been consumed or downloaded by a student before the refund was requested.
  • Multiple refunds have been requested by a student for the same course.
  • Excessive refunds have been requested by a student.
  • Users whose account is blocked or access to courses is disabled due to violation of our Terms and Conditions or the Rules of Trust and Security.
  • We do not grant refunds for any subscription services.
  • These refund restrictions will be enforced to the extent permitted by applicable law.

We accept most international credit and debit cards like Visa, MasterCard, American Express, JCB and Discover. Bank Transfers also may be an option.

Smart Virtual Classroom (open digital / virtual classroom).

Conducting classes is based on the fact that the teacher demonstrates text, drawings, graphics, presentations on an interactive board, while the content appears in the student's electronic notebook. A specially designed digital notepad and pen are used to create and edit text and images that can be redirected to any surface via a projector.

Classes are live streamed online, automatically recorded and published on the Learning Portal, allowing you to save them for reuse anytime, anywhere, on any mobile device. This makes it possible not to miss classes and keep up with classes and keep up with the passage of new material.

Game Based Learning (learning using a virtual game environment)

Real-life training uses the principles of game organization, which allows future professionals to rehearse and hone their skills in a virtual emergency. Learning as a game provides an opportunity to establish a connection between the learning activity and real life.

The technology provides the following learning opportunities:

  • Focused on the needs of the user
  • Instant feedback
  • Independent decision making and choice of actions
  • Better assimilation and memorization of the material
  • Adaptive pace of learning tailored to the individual needs of the student
  • Better transfer of skills learned in a learning situation to real conditions

Basic principles of training:

  • A gradual increase in the level of difficulty in the game;
  • Using a simplified version of a problem situation;
  • Action in a variable gaming environment;
  • The right choice is made through experimentation.

The main advantages of Game Based Learning technology:

  • Low degree of physical risk and liability
  • Motivation to learn while receiving positive emotions from the process;
  • Practice - mirroring the real situation
  • Timely feedback
  • Choice of different playing roles
  • Learning in collaboration
  • Developing your own behavior strategy
Laboratory workshops using remote access technologies

Conducting practical classes online using remote access technologies for presentations, multimedia solutions and virtual reality:

  • Laboratory workshops that simulate the operation of expensive bench equipment in real production
  • Virtual experiment, which is visually indistinguishable from a remote real experiment performed
  • Virtual instruments, which are an exact copy of real instruments
  • Mathematical modeling to clarify the physical characteristics, chemical content of the investigated object or phenomenon.
Power generation using steam or gas turbines and combined cycle power plants
Language: English
Level: Intermediate
Request this course for your company in a in-house format